|
HOUSING:
Die-cast aluminum.
Fasteners are 300 series stainless steel.
|
|
FINISH:
Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.
|
|
LAMPING:
12W maximum wedge base T3-¼ lamp.
10W wedge base T3 ¼ (xenon) lamp is included with fixture.
Lower wattage lamps are acceptable.
Xenon lamp life is approximately 10,000 hours.
Lamp does not need to be protected and can be directly handled.
|
|
ELECTRICAL ASSEMBLY:
Wedge base socket type (T3-¼ or T5).
12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire.
Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included.
12 Volt system requires remote transformer, not included.
|
|
INSTALLATION & MOUNTING:
Two (2) Stainless #8 wood screws (supplied) via key slots.
|
|
WARRANTY:
Three-year limited warranty.
|
|
CERTIFICATIONS:
UL Listed to U.S. safety standards for wet locations.
cUL Listed to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
|
|
Height :
2 3/8" (60mm) |
|
Width:
3 1/2" (89mm) |
|
Depth:
2" (51mm) |
|
Max. Weight:
0.30 lb |