|
HOUSING:
Cool external temperatures - all below 31ºC when underwater - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact.
One-piece injection molded ULTEM® High Performance Polymer composite.
Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance.
Fasteners are 300 series stainless steel.
|
|
FINISH:
Composite is textured, pressure formed, molded-in-color.
|
|
OPTICAL ASSEMBLY:
Integral collimating flood (25°) optics.
Clear convex lens, high temperature glass furnished with silicone O-ring for watertight seal.
|
|
LAMPING:
White high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (5500K nominal).
|
|
ELECTRICAL ASSEMBLY:
Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature.
Standard 10 ft. 18-2, 105° C, STWA water-resistant cord. Fixture is prewired and potted to prevent water entry.
Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts.
12 Volt system requires remote transformer, not included.
|
|
WARRANTY:
Three-year limited warranty.
|
|
CERTIFICATIONS:
UL Listed to U.S. safety standards for wet locations.
cUL Listed to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
|
|
IP RATING:
IP66/68: Dust-tight and dual rated - sealed against direct jets of water and against temporary immersion at a depth greater than 1 meter (3.28 feet).
|
|
Height :
6 11/16" (170mm) |
|
Width:
4 1/16" (103mm) |
|
Max. Weight:
5.04 lb. |