Skip Navigation Links
Home
Products
News
Education
Municipal
Landscape
Commercial
LED
Downloads
 
Teardrop (TF8): Products: Line Voltage: Pendants
Additional Information
Description
Hadco's new Teardrop is the easiest to install, easiest to maintain Teardrop fixture on the market. It combines totally Tool-Free maintenance with IP66 optical assemblies that seal out water, dust, and insects. A single external latch opens the fixture, which hangs open freely, allowing access to both the lamp and the ballast at the same time. And, both can be changed in a matter of seconds, with no tools. Start saving time and money today by specifying and installing the new TF8 and TF9 Teardrops from Hadco.

Specifications
HOUSING:  Hadco's new Teardrop is the easiest to install, easiest to maintain Teardrop fixture on the market. It combines totally Tool-Free maintenance with IP66 optical assemblies that seal out water, dust, and insects.
A single external latch opens the fixture, which hangs open freely, allowing access to both the lamp and the ballast at the same time. And, both can be changed in a matter of seconds, with no tools.
Start saving time and money today by specifying and installing the new TF8 and TF9 Teardrops from Hadco.

360 low-copper die-cast aluminum alloy . Single, stainless steel exterior latch. Tool-less lamp access. Tool-less ballast access. Tool-less ballast assembly with quick disconnects for easy maintenance. A weatherproof ballast assembly isolates the ballast from water and heat for longer life. IP66 optical chamber seals out dust, insects, and moisture. Cast Neck option (N) for use with clamp collar, or Threaded Pipe option (P) 1-½-11.5 MPSM pipe nipple for mounting to arm. All non-ferrous fasteners prevent corrosion and ensure longer life.
FINISH:  Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.  Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.   For larger projects where a custom color is required, contact the factory for more information. 
OPTICAL ASSEMBLY:  Type III Cutoff.  Horizontal lamp mounting.  Type IV Cutoff.  Type V Cutoff.  Vertical lamp mounting.   Hydro-formed aluminum reflector is polished, etched, and clear anodized with semi-specular finish.  U.V. stabilized acrylic long globe with Optical Rib (TM) technology.  Low-expansion borosilicate prismatic glass long globe with Optical Rib (TM) technology.  Clear tempered flat glass lens. 
LAMPING:  MH and HPS Medium base: E17.  Pulse Start Metal Halide (PMH) Medium base: E17.  MH and 250W HPS Mogul base: ED28.  Pulse Start Metal Halide (PMH) Mogul base: ED28.  HPS Mogul base: E23.5.  Induction lamping available. Consult Factory  LED light engine available, consult factory 
ELECTRICAL ASSEMBLY:  Twistlock socket cap allows for tool-less relamping.  Tool-less ballast assembly with single captivated pin and quick disconnects for easy maintenance.  4kv rated porcelain mini-can base. Nickel-plated screw shell with center contact.  4kv rated mogul base porcelain socket. Nickel-plated screw shell with center contact. 
BALLAST:  All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable. 
IP RATING:  IP66: Dust-tight and sealed against direct jets of water.  No Ingress of dust.  Water projected in powerful jets shall not enter the enclosure in harmful quantities.  Will withstand 26.4 gallons of water per minute. 
CERTIFICATIONS:  ETL Listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Vibration tested to ANSI C136.31 for Bridge Applications.  Manufactured to ISO 9001:2008 Standards. 
WARRANTY:  Three-year limited warranty. 
Height :  TF8 Flat: 20 1/4" (51cm)
Width:  TF8 Flat: 15 1/2" (39cm)
Height :  TF8 Long: 31 1/2" (80cm)
Width:  TF8 Long: 15 1/2" (39cm)
Max. EPA:  TF8 Flat: 1.29 sq. ft.
Max. EPA:  TF8 Long: 1.40 sq. ft.
Max. Weight:  TF8Flat: 28 lbs
Max. Weight:  TF8 Long: 32 lbs
IESNA Classifications:  Cutoff: Cutoff Optics
IESNA Classifications:  Full Cutoff: Flat Glass

Ordering Guide
Example: TF8  N  A  GF  3  N  D  70S  E 
Product Code
  TF8 Teardrop  
Mounting
  N Cast Neck
  P Threaded Pipe
Finish
image A Black
image B White
image G Verde
image H Bronze
image J Green
Lens
  GF Flat Glass *1
  GL Glass Long Globe
  KL Acrylic Long Globe
Optics
  3 Type III *2
  4 Type IV
  5 Type V
Photo Control
  N None
Socket
  D Medium
  G Mogul
  R Induction *5
Wattage
  70S 70W HPS
  100S 100W HPS
  150S 150W HPS
  200S 200W HPS *3, 4
  250S 250W HPS *3, 4
  70H 70W MH *2
  100H 100W MH *2
  150H 150W PMH
image 250H 250W PMH *3, 4
  85R 85W Induction *5, 6
Voltage
  E 120V
  F 208V
  G 240V
  H 277V
  J 480V
  K 347V
*1 For use with Type III (3) optics only.
*2 Available with Medium Base (D) socket only.
*3 Available in Type IV (4) and Type V (5) opics only.
*4 Available with Mogul Base (G) socket only.
*5 Consult Factory if ordering Induction (R) socket or wattages.
*6 Not available in 347V (K).

Accessories
Flat Brim Flat Brim (TF8-FB)
Radial Wave Brim Radial Wave Brim (TF8-RB)
  Threaded Clamp Collar (TFTC1) Threaded clamp collar for arms threaded 3/4-14” NPS
Pendant Adapter with Photocell Receptacle Pendant Adapter with Photocell Receptacle (TFHAM3) 2-3/8” O.D. horizontal arm mounting adapter with photocell twist-lock receptacle
Pendant Adapter with Finial Pendant Adapter with Finial (TFHAM4) 2-3/8” O.D. horizontal arm mounting adapter without photocell twist-lock receptacle

About Us | History | Contact | Directions | Privacy Statement | Disclaimer | Warranty
©2004-2013 Koninklijke Philips N.V. All rights reserved.