Skip Navigation Links
Home
Products
News
Education
Municipal
Landscape
Commercial
LED
Downloads
 
Fluorescent Aluminum Floodlyte (WA2): Products: Line Voltage: Floodlytes
Additional Information

Specifications
HOUSING:  Die-cast aluminum.  Integral cast hinge with stainless steel pins is concealed internally and allows easy access for relamping.  Aluminum die-cast. Locking teeth provide adjustment by tightening one (1) stainless steel recessed screw. ½-14" NPS stainless steel threaded nipple provides secure mounting.  One-piece die-cast aluminum. Hinged doorframe is secured to the housing by four (4) stainless steel recessed captive Phillips-head screws.  One piece molded silicone gasket between the housing and doorframe provides a long-lasting weather-tight seal. 
FINISH:  Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.  For larger projects where a custom color is required, contact the factory for more information. 
OPTICAL ASSEMBLY:  Formed from highly reflective Hammertone aluminum and semi-specular kick plates. Reflector assembly is secured to the housing with four (4) stainless steel screws.  1/8" tempered silicone glass.  One-piece molded silicone gasket and spring clips.  Aiming up to a 60° back tilt. Fixtures used outdoors must be protected from rain and sprinklers if aimed downward. 
ELECTRICAL ASSEMBLY:  Mounted directly onto the reflector assembly and are UL recognized for appropriate lamps.  Mounted directly to the housing and pre-wired with leads extending from the swivel arm. All electrical components are UL, cUL recognized. 
BALLAST:  Integral core and coil, NPF, Class B, starting temperature 25° F. 
WARRANTY:  Three-year limited warranty. 
CERTIFICATIONS:  ETL listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Manufactured to ISO 9001:2008 Standards. 
Height :  9" (229mm)
Depth:  7 1/8" (181mm)
Width:  Short: 17 3/4"
Width:  Medium: 30 3/4" (781mm)
Width:  Long: 55 1/2" (1410mm)
Max. Weight:  9 lb.

Ordering Guide
Example: WA2  A  CF213  E 
Product Code
  WA2 Fluorescent Aluminum Floodlyte  
Finish
image A Black
image B White
image H Bronze
image G Verde
Wattage
  CF213 (2) 13W CFL *1
  CF226 (2) 26W CFL *1
  CF232 (2) 32W CFL *1
  F40BX 40W Biax *2
  F240BX (2)Biax *2
  F240BXCW (2)Biax *2
  F32CW 32W T8 *3
  F232CW (2)T8 *3
Voltage
  E 120V
  H 277V
*1 Fixture housing length of 17-3/4" available only.
*2 Fixture housing length of 30-3/4" available only.
*3 Fixture housing length of 55-1/2" available only.

Accessories

None Available
None Available
Cylindrical J-Box Cylindrical J-Box (MW33) Architecturally styled die-cast aluminum J-box for above grade installations. Large access cover allows easy entry into the splice compartment and for mounting a button eye photocell in the cover. Photocell may be ordered factory installed or "knock-out" may be drilled in the field and photocell installed. One-piece molded neoprene cover gasket provides a water tight seal. Cover screws are captive and countersunk. Internal ground screw is provided. On top a 1/2" NPSM is provided for fixture mounting and on the bottom two (2) 1/2" NPT for conduit entry.
Cylindrical J-Box Cylindrical J-Box (MW331) Architecturally styled die-cast aluminum J-box for above grade installations. Large access cover allows easy entry into the splice compartment and for mounting a button eye photocell in the cover. Photocell may be ordered factory installed or "knock-out" may be drilled in the field and photocell installed. One-piece molded neoprene cover gasket provides a water tight seal. Cover screws are captive and countersunk. Internal ground screw is provided. On top a 1/2" NPSM is provided for fixture mounting and on the bottom two (2) 1/2" NPT for conduit entry. (Cylindrical J-Box with 120 volt Button-eye photocontrol).
Cylindrical J-Box Cylindrical J-Box (MW332) Architecturally styled die-cast aluminum J-box for above grade installations. Large access cover allows easy entry into the splice compartment and for mounting a button eye photocell in the cover. Photocell may be ordered factory installed or "knock-out" may be drilled in the field and photocell installed. One-piece molded neoprene cover gasket provides a water tight seal. Cover screws are captive and countersunk. Internal ground screw is provided. On top a 1/2" NPSM is provided for fixture mounting and on the bottom two (2) 1/2" NPT for conduit entry. (Cylindrical J-Box with 277 volt Button-eye photocontrol).
120 Volt Button-eye Photocell 120 Volt Button-eye Photocell (M0004)
277 Volt Button-eye Photocell 277 Volt Button-eye Photocell (M0005)
Wall or Ceiling Canopy Mount Wall or Ceiling Canopy Mount (MW34) Fixture mounts to a cast aluminum mounting plate and installs on standard 4" square or octagonal J-box via galvanized steel plate. Fixture mounts with 1/2" stainless steel nipple and is locked by turning two (2) stainless steel set screws. The aluminum canopy cover provides splice access.
Tree Mount J-Box Tree Mount J-Box (TM3) Cast aluminum J-box for tree mount installations. Two (2) cast ears with holes allow easy installation with galvanized lag screws with hex nuts (provided) to mount the J-box away from the tree surface. Front access cover allows easy entry into the splice compartment. On the front a 1/2" NPSM is provided for fixture mounting and four (4) 1/2" NPT equally spaced 90 degrees on the side for conduit entry. Fixture is mounted by turning two (2) stainless steel set screws.
Single Post Top Mount Single Post Top Mount (PT21) One-piece cast aluminum fitter for mounting a single fixture on a pole with a 2" pipe tenon. Fixture mounts with 1/2" stainless steel stud and is locked by turning two (2) stainless steel set screws. Fitter is secured to the pole with a 1/4"-20 allen set screw allowing 360 degrees horizontal adjustment and has a removable top cap for splice access.
Twin Post Top Mount Twin Post Top Mount (PT22) One-piece cast aluminum fitter for mounting two (2) fixtures on a pole with a 2" pipe tenon. Fixture mounts with 1/2" stainless steel stud and is locked by turning two (2) stainless steel set screws. Fitter is secured to the pole with a 1/4"-20 allen set screw allowing 360 degrees horizontal adjustment and has a removable top cap for splice access.
Single Post Top Mount for 3" O.D. Pole Single Post Top Mount for 3" O.D. Pole (PT23) One-piece cast aluminum fitter for mounting a single fixture on a 3" O.D. pole. Fixture mounts with 1/2" stainless steel stud and is locked by turning two (2) stainless steel set screws. Fitter is secured to the pole with a 1/4"-20 allen set screw allowing 360 degrees horizontal adjustment.
(DISCONTINUED) Stanchion Mount with Twin Mount (DISCONTINUED) Stanchion Mount with Twin Mount (ST18) 3" O.D. x 18" high extruded aluminum post (0.125" wall) with 2" pipe tenon to allow Twin Mount Arm (TA22 included) to slip over the tenon. Flush mount access cover allows easy access for wiring connections. Internal ground lug supplied.
Single Stanchion Mount Single Stanchion Mount (SS18) 3" O.D. x 18" high extruded aluminum post (0.125" wall) allows a WA3 or WB3 to fit into the 1/2" N.P.S.threaded hole. Flush mount access cover allows easy access for wiring connections. Internal ground lug supplied.

About Us | History | Contact | Directions | Privacy Statement | Disclaimer | Warranty
©2004-2013 Koninklijke Philips N.V. All rights reserved.