Accessories

BMA1

(For use with Ingrounds)

Re-Enterable encapsulant for inground installations. Two-part field mixable material in one convenient package. Boxed 6 per carton.

BMA4

(For use with Ingrounds, Accents and Area/Walkway)

Corrosion preventive compound. Two-ounce tube. Specially formulated non-conductive sealant and corrosion preventative. For use on sockets and electrical contacts. Boxed 6 per carton.

BPC1

(For use with LVTS3, LVTS6, LVTS9)

Photo Cell. Finger type, adjustable photo control. 1/2" N.P.T. Mounting

BPC15

Plug-in photo cell, 15 ft. lead for direct mount to transformer housing.

BPC3

(For use with LVTS3, LVTS6, LVTS9)

Plug-in photo cell, 3" lead for direct mount to transformer housing.

Low Voltage Cable
Single Circuit

(For use with LVTS3, LVTS6, LVTS9)
(Use with all 12V Accent and Area/Walkway)

BSCW100-12 - 12V, 2 conductor, 12 gauge, 100 ft.
BSCW500-12 - 12V, 2 conductor, 12 gauge, 500 ft.
BSCW500-10 - 12V, 2 conductor, 10 gauge, 500ft. 

BTM3 / BTM1 / BTM2

(For use with Accents and Area/Walkway)

BTM1 - Low Voltage tree mount canopy. Combination lag screws and hex nuts included.
BTM1N - Same as TM1 except Natural Cast Bronze.
BTM2 -Line voltage tree mount cast aluminum junction box. Combination lag screws & hex nuts included.
BTMC2DB - Composite line voltage tree mount junction box. Combination lag screws & hex nuts included.
BTM3 - Cast aluminum junction box. 4" (102mm) x 2-1/4" (57mm) with 1/2" NPT (13mm) top inlet and four 1/2" NPT (13mm) side inlets.

BIBH

(For use with HID Accent and Area/Walkway)

BIBH - Composite inground box, MH
BIBH specification sheet available

BABM/BABH

(For use with HID Accent and Area/Walkway)

BABM - Steel above ground box, MV
BABM specification sheet available

BABH - Steel above ground box, MH
BABH specification sheet available

BTMS10

(For use with Accents and Area/Walkway)

BTMS10 - Nylon tree strap, 10 ft.